Magma 7 Slot Series Especificações descarregar pdf (Página 26)

CAUTION

Before touching anything inside the chassis, move to an ESD station

and follow proper ESD procedure. Failure to do so may result in

electrostatic discharge damaging the computer or its components. Fo

more information, see “Protecting Against Electrostatic Discharge”.

Use the procedures for shutting down your system provided in your

owner's manual or system documentation. Turn off power to your

computer, but DO NOT unplug the power cord from the power

receptacle. Touch the metal case on your computer to discharge any

built up static electricity.

Remove the cover.

Step Three: Remove PCI Cards from Host Computer

Electrostatic Discharge (ESD) Warning

All PCI cards are susceptible to electrostatic discharge. When

moving PCI cards, it is best to carry the cards in anti-static

packaging. If you need to set a PCI card down, be sure to place i

inside or on top of an anti-static surface. For more information, see

“Protecting Against Electrostatic Discharge”.

Remove any PCI cards from your host system that you wish to relocate

to the PCI expansion system.

Step Four: Install PCI Host Interface Card

Install the PCI host interface card in any available PCI slot in your host

computer and secure with a retaining screw.

The PCI Host Interface Card is a standard "short" universal PCI adapter

card. Install it in your host computer (or an "upstream" PCI Expansion

System), by inserting the card into any available PCI slot and securing it

with a retaining screw.

NOTE

Some applications require that the PCI Host Interface Card be installed

in a specific slot in the host computer. For more information, please

contact the MAGMA Technical Support Department.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 62 63

Sem comentários

Magma 7 Slot Series Especificações Página 26