Magma 7 Slot Series Especificações descarregar pdf (Página 24)

Step Eight: System Should Be Up and Running

WARNING

High voltages are present inside the chassis when the unit’s powe

cord is plugged into an electrical outlet. Disconnect the power cord

from its source before replacing the chassis cover. Turning the system

power off at the power on/off switch does not remove power to

components. High voltage is still present.

CAUTION

Before touching anything inside the chassis, move to an ESD station

and follow proper ESD procedure. Failure to do so may result in

electrostatic discharge damaging the computer or its components. Fo

more information, see “Protecting Against Electrostatic Discharge”.

If there is a problem, be sure to turn off the power before making any

changes. If you are having trouble with the system, turn off the host

computer and the chassis, then check that all cards are seated properly

and all cables are connected.

If you are still having problems, contact MAGMA Technical Support for

more help.

Step Nine: Finishing Touches

WARNING

High voltages are present inside the chassis when the unit’s powe

cord is plugged into an electrical outlet. Disconnect the power cord

from its source before replacing the chassis cover. Turning the system

power off at the power on/off switch does not remove power to

components. High voltage is still present.

CAUTION

Before touching anything inside the chassis, move to an ESD station

and follow proper ESD procedure. Failure to do so may result in

electrostatic discharge damaging the computer or its components. Fo

more information, see “Protecting Against Electrostatic Discharge”.

After your system is working properly, replace any empty slots with slot

covers, and replace the host computer cover and expansion chassis

cover.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 62 63

Sem comentários

Magma 7 Slot Series Especificações Página 24