Magma EOwave Instruções de Operação descarregar pdf (Página 15)

28 29

4. PROGRAMMING SECTION

4.6. Transpose Menu

The transpose menu not only offers a function to transpose the current preset / pattern in semitones, it also

opens up a second function level which accesses some real-time processing functions of the preset / pat-

tern currently selected.

To enter the transpose menu, please

• Hit SHIFT (hold) + TRANSPOSE

Nowmostbuttonshavebeenassignedtoasecondlayeroffunctions,accordingtothefollowinggure.

4.6.1. Transpose Function

After entering the transpose menu, the transpose function is active. Simply turn the VALUE encoder to

transpose the preset / pattern sequence in semitones.

The display of the selected transpose interval works exactly as in the note menu when programming a se-

quence–pleaserefertopage19:

The upper row of LEDs turns into a ”one-octave keyboard”. To access the ”black keys”, simply observe the

LEDs when turning the value encoder: A dark LED between two illuminated steps (e.g. between ”C” and

”D”) means, a ”sharp C / C#” is programmed.

When tweaking the value encoder a bit further, you may notice that the LEDs in the lower row also change.

The lower row displays the octave setting of the transposition.

This setting will not be stored as a part of a preset or pattern but will remain in memory after powering

MAGMA down.

You can simply transpose a preset or pattern in real time, either via MIDI notes transmitted

from a MIDI keyboard connected, or via another MIDI controller device of your choice.Please

note that the velocity data transmitted by your MIDI device will directly affect the volume of the

current sequence.

4.6.2. Single / Multi Trigger

Hit PRESET to toggle between single and multiple triggering when receiving MIDI notes from an external

MIDI device.

• Multi Trigger (PRESET LED off): Every incoming MIDI note-on command will trigger a note.

(default setting).

• Single Trigger (PRESET LED on): New notes will be triggered only after MAGMA has received a

MIDI-note off command.

This setting will be stored as a part of a preset or pattern.

4.6.3. Glide on / off

Hit PATTERN to toggle between glide function on / off.

• Glide on (PATTERN LED on): The pitch of every new note played slides up or down from the note

played previously.

• Glide off (PATTERN LED off): Only notes played legato (via external MIDI device) will slide (default

setting).

Use the GLIDE knob to adjust the slide time.

This setting will be stored as a part of a preset or pattern.

4.6.4. LFO Sync

Hit SAVE PRST to toggle between LFO sync on / off.

• LFO sync on (SAVE PRST LED on): Both LFOs are synced to the clock of MAGMA´s on-board

sequencer. If MAGMA receives an external MIDI clock signal,

his clock will become the time-base for MAGMA´s sequencer and / or

the LFOs.

Turning the SPEED knob will change the LFO-speed stepwise in frac

tions of musical note durations.

• LFO sync off (SAVE PRST LED off): Both of MAGMA´s LFOs run independently.

This setting will be stored as a part of a preset or pattern.

TRANSP A

SHUFFLE B SWING RST

hold

TRANSP A

SHUFFLE B SWING RST

VAL transposes current sequence

upper LED row shows selected note

lower LED row shows selected octave

RANDOM randomises current sequencePRESET toggles single/multi trigger

SAVE PRST toggles LFO sync on/off

PATTERN toggles glide on/off

running direction back and forth

running direction backwards

running direction forwards

SHIFT + TRANSP accesses 2nd function level for lower buttons

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 21 22 23

Comentários a estes Manuais

Sem comentários

Magma EOwave Instruções de Operação Página 15

Comentários a estes Manuais

Manuais e produtos relacionados com Sintetizador Magma EOwave